An entire DCC system in the palm of your hand! This 2 Amp system can operate 2 or 3 HO sized trains, or 4 N scale trains. This cab provides all of the capability and ease of use that you’ve heard about in our Power Pro system, at an entry level price. Installation is a snap. Hook two wires to your track and plug in the cab. You’re off and running trains! The Power Cab kit contains: Power Cab, 7' Power Cab Cable, PCP Power Panel, Power Supply, Pro Cab Coiled Cord, and Manual

This booster is an add-on to the Power Cab system. Brings the total Amperage available to the system to 3 Amps. Operate more trains with more cabs. Requires a power supply such as our P515.

This booster is an add-on to the Power Cab/Smart Booster system. If you need more power than the Smart Booster alone can supply, the DB3 supplies 3 Amps of continuous voltage to your track. Enough to handle large lashups of locomotives and still have reserve capacity. Recommended for Z through HO scales. Requires a power supply such as our P515.

The Auto-SW adds a separate program track to your Power Cab system. Prevents accidental programming of ALL locos on your track when using Program Track mode. Automatically disconnects your main line when in Program Track mode (does not affect Program on Main). Compatible with ALL DCC systems such as DigitraxTM Big Boy, Empire Builder and Bachmann EZ-CommandTM.

Add a separate PCP panel to operate your Power Cab in other places or on other layouts. Use the P114 below and you will only have to move the Power Cab.

An additional or replacement DC power supply for the Power Cab system and other model railroad uses. Input 120VAC/220VAC, output 13.5VDC.

Circuit protection for up to 6 sections of your railroad. Operates with ANY DCC system. Factory set to 1 Amp per section. Sections can be connected together for more power per section. See optional lamp packs below for 1.75 Amps per section.

Pack of 6 replacement lamps for the CP6 circuit protector. 1 Amp and 1.75 Amp packs available.